1、注意在使用過程中的電源

1. Pay attention to the power supply during use

使用超聲波清洗機設備規范的電源和電源線，用戶的電源電路必須配備專用于清洗機的空氣開關，以便在需要時打開和清潔機電源。由于超聲波清洗機與水、腐蝕(腫脹)液位接觸，易引起滲漏，請遵照接地線的標準要求。

The user's power circuit must be equipped with an air switch specifically designed for the cleaning machine, in order to turn on and clean the machine power when needed, using the standardized power supply and power cord for the ultrasonic cleaning machine equipment. Due to contact with water and corrosive (swollen) liquid levels, ultrasonic cleaning machines are prone to leakage. Please follow the standard requirements for grounding wires.

2、要注意在使用過程中定期清洗劑

2. Pay attention to regular cleaning agents during use

超聲波清洗機采用不易燃洗滌劑，不使用易燃易爆物質進行清洗劑，使用設備時需確保易燃易爆物質的應用避免場合，用戶必須使用一定的物質在特殊情況下，應咨詢部門確認安全，并采取適當的措施。

The ultrasonic cleaning machine uses non flammable detergents and does not use flammable and explosive substances for cleaning. When using the equipment, it is necessary to ensure that the use of flammable and explosive substances is avoided. Users must use certain substances. In special circumstances, the department should be consulted to confirm safety and appropriate measures should be taken.

3、平時要注意講究防潮的方法策略

3. Pay attention to moisture-proof methods and strategies in daily life

電氣控制箱及相關電器元件如注意不要濺水，遠離蒸汽、腐蝕性氣體、灰塵等。在清洗槽內無液體或液位，會對設備造成不可逆轉的損壞，使用所需的保證，使油箱進入全量的清潔液

Electrical control boxes and related electrical components should be kept away from splashing water, steam, corrosive gases, dust, etc. If there is no liquid or liquid level in the cleaning tank, it will cause irreversible damage to the equipment. Use the necessary guarantee to allow the oil tank to enter the full amount of cleaning liquid

4、注意經常清潔和運作條件

4. Pay attention to regular cleaning and operating conditions

當超聲波清洗機長時間不使用時，請釋放清洗液，在槽內和表面干燥后保護膜，防止設備腐蝕老化更快。保持超聲波清洗機工作場所通風、干燥和清潔，這有利于超聲波清洗機的長期有效運行，優化工作環境條件。

When the ultrasonic cleaning machine is not in use for a long time, please release the cleaning solution, dry the tank and surface, and protect the film to prevent faster corrosion and aging of the equipment. Maintaining ventilation, dryness, and cleanliness in the workplace of ultrasonic cleaning machines is beneficial for their long-term effective operation and optimizing working environment conditions.