1. 選擇合適的清洗液

　　1. Choose the appropriate cleaning solution

　　清洗液的選擇對于超聲波清洗設備的效果至關重要。不同材質的工件和污垢類型需要不同的清洗液。例如，當清洗金屬部件時，常用的清洗液可以是堿性溶液，而對于電子元件，使用水性清洗液更為合適。據統計，選擇合適的清洗液能提高清洗效率超過30%。在選擇時，務必參考制造商的建議，確保其與超聲波清洗設備的兼容性。

　　The selection of cleaning solution is crucial for the effectiveness of ultrasonic cleaning equipment. Different materials of workpieces and types of dirt require different cleaning solutions. For example, when cleaning metal parts, the commonly used cleaning solution can be alkaline solution, while for electronic components, water-based cleaning solution is more suitable. According to statistics, choosing the appropriate cleaning solution can improve cleaning efficiency by over 30%. When choosing, it is important to refer to the manufacturer's recommendations to ensure compatibility with ultrasonic cleaning equipment.

　　2. 調整超聲波頻率

　　2. Adjust the ultrasonic frequency

　　超聲波清洗設備的頻率通常在20kHz到40kHz之間。頻率的調整可以根據清洗物品的性質、污垢類型來優化清洗效果。例如，對于較大或較重的污垢，低頻率（如28kHz）會更有效，而對于鵝卵石或成功的細小顆粒，則可以選擇高頻率（如40kHz）。據數據顯示，適當頻率的選擇可以使清洗效率提高20%以上，達到快速清洗的目的。

　　The frequency of ultrasonic cleaning equipment is usually between 20kHz and 40kHz. The frequency adjustment can optimize the cleaning effect based on the nature of the cleaning items and the type of dirt. For example, for larger or heavier dirt, low frequencies (such as 28kHz) are more effective, while for pebbles or successful fine particles, high frequencies (such as 40kHz) can be chosen. According to data, selecting an appropriate frequency can increase cleaning efficiency by more than 20%, achieving the goal of rapid cleaning.

　　3. 控制水溫

　　3. Control the water temperature

　　適宜的水溫不僅能改善清洗液的效果，還能顯著提升超聲波清洗的效率。一般來說，溫度在40-60攝氏度時，清洗效果最佳。根據研究，升高水溫能夠加速清洗液的分子運動，從而增強清潔效果。數據顯示，提升水溫每增加10度，清洗時間可減少約50%。因此，在使用超聲波清洗設備時，合理控制水溫是提升效率的重要方式。

　　Appropriate water temperature can not only improve the effectiveness of cleaning solution, but also significantly enhance the efficiency of ultrasonic cleaning. Generally speaking, the best cleaning effect is achieved when the temperature is between 40-60 degrees Celsius. According to research, increasing the water temperature can accelerate the molecular movement of the cleaning solution, thereby enhancing the cleaning effect. Data shows that for every 10 degrees increase in water temperature, cleaning time can be reduced by about 50%. Therefore, reasonable control of water temperature is an important way to improve efficiency when using ultrasonic cleaning equipment.

　　4. 輪換清洗工件

　　4. Rotate and clean workpieces

　　在超聲波清洗設備中，清洗物品的放置位置和數量會直接影響清洗效果。為了確保每個工件都能充分暴露在超聲波波動中，建議定期輪換或間隔放置清洗工件。過于擁擠的布局會導致超聲波的輻射不均，影響清洗效率。一份行業報告顯示，通過合理排列清洗件，清洗效率最高可提升50%。為此，用戶應考慮根據清洗容器的大小來分配工件。

　　In ultrasonic cleaning equipment, the placement and quantity of cleaning items directly affect the cleaning effect. To ensure that each workpiece is fully exposed to ultrasonic waves, it is recommended to regularly rotate or place cleaning workpieces at intervals. Overcrowded layout can lead to uneven radiation of ultrasonic waves, affecting cleaning efficiency. An industry report shows that by properly arranging cleaning parts, cleaning efficiency can be increased by up to 50%. For this reason, users should consider allocating workpieces based on the size of the cleaning container.

　　以上的精彩內容來自：多槽手動超聲波清洗機 更多的精彩內容請關注我們的官方網站：http://www.chendakeji.cn 我們會有更多精彩內容等您查看。

　　The above exciting content comes from: Multi slot manual ultrasonic cleaning machine. For more exciting content, please follow our official website: http://www.chendakeji.cn We will have more exciting content waiting for you to view.