超聲波清洗是一種在工業上應用廣泛、效果良好的清洗方法。它的工作原理是超聲波在清洗液中傳播時，清洗液中的微小氣泡在聲場的作用下發生振動。當聲壓達到一定值時，氣泡會迅速增長。

Ultrasonic cleaning is a widely used and effective cleaning method in industry. Its working principle is that when the ultrasonic wave propagates in the cleaning solution, the tiny bubbles in the cleaning solution vibrate under the action of the sound field. When the sound pressure reaches a certain value, the bubbles will grow rapidly.

然后，關閉瞬間的爆破產生的沖擊波可以達到數千個大氣壓。沖擊波降低污漬與被清洗工件的附著力，可以破壞不溶性污漬，使之分散在清洗液中，從而達到清洗的目的。雖然氣泡的爆裂能量很高，但由于每個氣泡的體積很小，不會對工件造成機械損傷和明顯的溫升。

Then, the shock wave generated by the blasting at the moment of closing can reach thousands of atmospheres. The shock wave reduces the adhesion between the stain and the cleaned workpiece, which can destroy the insoluble stain and disperse it in the cleaning solution, so as to achieve the purpose of cleaning. Although the burst energy of bubbles is very high, because the volume of each bubble is very small, it will not cause mechanical damage and obvious temperature rise to the workpiece.

為了更加節能、環保、經濟，清潔行業不斷轉型升級。超聲波作為一種清洗方式，越來越受到清洗企業的青睞。對于一些高產企業來說，每天需要清洗大量的工件，傳統的清洗方式已經不能滿足需求。普通單槽、多槽、機械臂超聲波清洗機無法滿足清洗速度的要求，超聲波清洗機可以彌補不足。，顯然是大多數企業的選擇。

In order to be more energy-saving, environmental protection and economic, the cleaning industry continues to transform and upgrade. As a cleaning method, ultrasonic is more and more favored by cleaning enterprises. For some high-yield enterprises, a large number of workpieces need to be cleaned every day, and the traditional cleaning method can not meet the demand. Ordinary single tank, multi tank and mechanical arm ultrasonic cleaning machine can not meet the requirements of cleaning speed, and the ultrasonic cleaning machine can make up for the deficiency., Obviously, it is the choice of most enterprises.

超聲波清洗機具有美觀、經濟、實用、節能環保、高效穩定、清洗效果好等優點。自動清洗由PLC控制完成。主要由：超聲波清洗、超聲波漂洗（噴淋）、風切、循環熱風干燥等組成（根據客戶實際需要設計各工藝環節）。

Ultrasonic cleaning machine has the advantages of beauty, economy, practicality, energy conservation and environmental protection, high efficiency and stability, good cleaning effect and so on. Automatic cleaning is controlled by PLC. It is mainly composed of ultrasonic cleaning, ultrasonic rinsing (spraying), air cutting, circulating hot air drying, etc. (each process link is designed according to the actual needs of customers).

超聲波清洗機使用注意事項：清洗機的電源和電加熱器的電源必須有良好的接地裝置。嚴禁無清洗液啟動清洗機，即清洗槽不加一定量的清洗液，不得開啟超聲波開關。對于有加熱設備的清洗設備，嚴禁在沒有液體的情況下打開加熱開關。

Precautions for the use of ultrasonic cleaning machine: the power supply of cleaning machine and electric heater must have good grounding device. It is forbidden to start the cleaning machine without cleaning fluid, that is, the cleaning tank does not add a certain amount of cleaning fluid, and the ultrasonic switch shall not be turned on. For cleaning equipment with heating equipment, it is strictly prohibited to turn on the heating switch without liquid.

山東超聲波清洗機提醒大家，禁止用重物（鐵件）撞擊清洗筒底部，以免損壞換能器芯片。超聲波發生器電源應使用220V/50Hz單電源，并配備2000W以上的穩壓器。清洗槽底部應定期沖洗，不得有過多雜物或污垢。每次更換新液時，只有在超聲波啟動后才能清洗零件。

Shandong ultrasonic cleaning machine reminds you that it is forbidden to hit the bottom of the cleaning cylinder with heavy objects (iron parts) to avoid damaging the transducer chip. The power supply of ultrasonic generator shall be 220V / 50Hz single power supply and equipped with voltage regulator above 2000W. The bottom of the cleaning tank shall be washed regularly without too much sundries or dirt. Each time a new fluid is replaced, the parts can be cleaned only after the ultrasonic wave is started.

超聲波清洗機清洗效果好要知道注意事項便是以上所講解的內容了，當然使用過程中是需要對其進行維護保養的，只有這樣才能讓清洗機的使用壽命延長，更多資訊就來關注網站www.chendakeji.cn了解吧。

The ultrasonic cleaning machine has good cleaning effect. The precautions are explained above. Of course, it needs to be maintained during use. Only in this way can the service life of the cleaning machine be prolonged. For more information, please pay attention to the website www.jnthcsb See. Com.