超聲波清洗機在我們的生活中還是有很多應用的，但是在使用過程中需要注意哪些清洗要求呢？下面小編就為大家詳細說說，一起來看看吧。

There are still many applications of ultrasonic cleaning machine in our life, but what cleaning requirements should we pay attention to in the process of use? Let's talk about it in detail. Let's have a look.

多槽式超聲波清洗機在運行過程中的主要原理是在運行過程中將其換能器，即功率超聲波頻率源的聲能，轉化為機械振動。使其將罐內的清洗液輻射成超聲波。由于超聲波的輻射，罐內液體中的微氣泡在聲波的作用下可以保持振動。

The main principle of the multi trough ultrasonic cleaning machine in the operation process is to convert the sound energy of its transducer, that is, the power ultrasonic frequency source, into mechanical vibration. Make it radiate the cleaning solution in the tank into ultrasonic waves. Due to ultrasonic radiation, microbubbles in the liquid in the tank can keep vibrating under the action of sound waves.

多槽式超聲波清洗機在運行時，當達到聲壓或聲強時，氣泡在運行過程中會迅速膨脹，然后又突然閉合。在此過程中，氣泡會立即關閉。沖擊波在氣泡周圍產生1012-1013pa的壓力和局部溫度調節。這種超聲波空化產生的巨大壓力可以破壞不溶性污垢并使它們分化成溶液。蒸汽型空化直接反復沖擊污垢。

When the multi trough ultrasonic cleaning machine is running, when the sound pressure or sound intensity is reached, the bubbles will expand rapidly during the operation, and then suddenly close. During this process, the bubble will close immediately. The shock wave generates 1012-1013pa pressure and local temperature regulation around the bubble. The huge pressure generated by this ultrasonic cavitation can destroy insoluble dirt and make them differentiate into solutions. Steam cavitation directly impacts dirt repeatedly.

多槽超聲波清洗機破壞清洗件表面的污垢和吸附。運行時，由于另一側的疲勞損傷，污垢層會剝落。氣泡的振動擦洗固體表面。一旦污垢層有接縫可鉆，氣泡立即“鉆入”并振動使污垢層脫落。由于空化作用，兩種液體在界面處迅速分散和乳化。

The multi slot ultrasonic cleaning machine destroys the dirt and adsorption on the surface of the cleaned parts. During operation, the dirt layer will peel off due to fatigue damage on the other side. The vibration of bubbles wipes the solid surface. Once the dirt layer has a joint that can be drilled, bubbles immediately "drill in" and vibrate to make the dirt layer fall off. Due to cavitation, the two liquids disperse and emulsify rapidly at the interface.

當固體顆粒被油污包裹并附著在清洗件表面時，油被乳化，固體顆粒自行脫落。超聲波在清洗液中傳播時，會產生正負聲壓，形成射流，沖擊清洗件，同時由于非線性效應產生聲和微聲電流，而超聲空化產生高-固液界面處的高速微射流。

When the solid particles are wrapped by oil and attached to the surface of the cleaning part, the oil is emulsified and the solid particles fall off by themselves. When ultrasonic wave propagates in the cleaning liquid, it will produce positive and negative sound pressure, form jet, impact the cleaning parts, and produce acoustic and micro acoustic current due to nonlinear effect, while ultrasonic cavitation will produce high-speed micro jet at the high solid-liquid interface.

全自動超聲波清洗機在使用過程中可以破壞污垢，去除或弱化邊界污垢層，增加運行中的攪拌和擴散效果，可以加速可溶性污垢的溶解，加強化學清洗劑的清洗影響。

The full-automatic ultrasonic cleaning machine can destroy dirt, remove or weaken the boundary dirt layer, increase the mixing and diffusion effect in operation, accelerate the dissolution of soluble dirt, and strengthen the cleaning effect of chemical cleaning agents.

以上就是多槽式超聲波清洗機的清洗是有相關要求的全部內容，希望它可以幫助你。如果您有任何需求或其他想了解的內容，請留言咨詢我們www.chendakeji.cn。

The above is all about the cleaning of the multi trough ultrasonic cleaning machine. I hope it can help you. If you have any needs or other content you want to know, please leave a message and consult us at www.jnthcsb com。